MF1 ZeroR Microfibre Buff Cloth
MF1 ZeroR Microfibre Buff Cloth

MF1 ZeroR Microfibre Buff Cloth

QUICK OVERVIEW

 
  • 40 x 40 cm
  • High polyamide content
  • Ultra soft and very effective for removing residues
Why use a Gtechniq ZeroR Microfibre Buff Cloth?
 
This short pile, warp knit 300gsm, 40x40cm, high polyamide content cloth is the optimum cloth for removing residues from delicate, high gloss surfaces.  The extra polyamide content (it has 30% vs as little as 10% for standard cloths) and the ultra split nature of the fibres make the MF1 exceptionally efficient at residue removal and significantly softer than standard cloths.  Hem edge material is the same material as the cloth thereby reducing the risk of marring to almost zero.
 
Colours may vary.
 
Size: 40x40 cm 
Weight: 300GSM 
Contains: 70% Polyester, 30% Polyamide, Ultra fine microfibre, 0.13 denier
 

Microfibre Care Guide

  • Wash microfibre products separately from other fabrics to avoid cloths being contaminated with lint
  • Wash at 50C using half the normal amount of bleach-free detergent
  • Do not use fabric softener as this clogs the microfibres reducing their effectiveness
  • If the cloth is very dirty adding half a cup of vinegar to the wash is advisable as it helps to remove product residues from the microfibres
  • Either air dry or machine dry at a low temperature

COVID-19 
Immediate Release - Thursday March 19th, 2020

 

Gtechniq North America is working diligently through the concerns with the Covid-19 Virus. We are taking the proper precautions to ensure the well being of our staff while also continuing to fulfill your orders, but will have limited staff at GTNA HQ.

 

Orders will go out per usual, but we appreciate your continued patience during this time. Longer wait times may occur for phone inquiries. The emails listed below are our preferred methods of contact:

 

Inquires - Infona@gtechniq.com 
Orders - Ordersna@gtechniq.com

 

Thanks, Gtechniq North America

OK Close